|

Santa Claus with Amigurumi Glasses Free Crochet Pattern

Pinterest Offical Page : Amigurumfree.msa.plus

Facebook Group: Amigurumi Free Patterns

Facebook Offical Page: Amigurumfree.msa.plus

Necessary materials and tools:

– Alize Bahar, Cotton Gold or Catania for body and dress. Alize Decofur for Santa’s beard.

– – Hook 2, 2-5 or 3 (or a suitable needle for the yarn used). It will

have a height of 25–26 cm from the point of the cap to the foot, but the final size will be

depend on the size of the hook and yarn that you work.

– – Buttons of decor (one for Santa’s ornament, sewn to Santa’s belt, New Year’s hat

or a snowman hat of any shape)

– – Red or white wire (you can buy in shops of creativity, a hobby!). Replace

this stuffing on Santa’s hand so she can bend. The same solution for the snowman

– – 10mm snowman nose pompom in a creative hobby shop

– – a needle for sweating bags

Additional Information::

All parts of the body begin with the amigurumi ring technique – except for Santa’s foot – and then

continue to work in a spiral without closing the rows.

– Use markers to track rows.

– Fill each piece continuously while crocheting.

– After the body parts have been made, cut the yarn, leaving the end of the thread 20

cm, which can be used for sewing.

Abbreviations:

MC = Magic circle

Sc = single crochet

Inc = increase, two sc in same st

Dec = decrease, two sc together

RND = round

Sc rnd = sc in every stitch of the rnd

St = stitch

Ch = chain

Sc rnd = sc in every st of the rnd

CC = Yarn color change

[…] = repeat instructions within brackets as specified.

PATTERN

Head (1 pc.) – use flesh-colored yarn!

1. Row: 6 SC into magic ring.

2. Row: inc * (6x) {12 SC}

3. Row: 1SC, inc (6x) {18 SC}

4. Row: 2 SC, inc (6x) {24 SC}

5. Row: 3 SC, inc (6x) {30 SC}

6. Row: 4 SC, inc (6x) {36 SC)

7. Row: 5 SC, inc (6x) {42 SC}

8. Row: 6 SC, inc (6x) {48 SC}

9. Row: 7SC, inc (6x) {54 SC}

10-18. Row: 54 SC {54 SC}

19. Row: 7 SC, dec (6x) {48 SC}

20. Row: 6 SC, dec (6x) {42 SC}

21. Row: 5 SC, dec (6x) {36 SC}

22. Row: 4 SC, dec (6x) {30 SC}

Cut the yarn!

Embroider eyes after the figure is fully assembled. Over the nose. Place them on 1 row

close to each other.

If you do not like the embroidery, you can replace it with 6 mm protective eyes.

(Protective eyes are located between rows 11-12, with an interval of about 5 columns.).

When embroidering eyes, always put them on your head after sewing on your nose relative to

him, but when using safe eyes, we will sew the nose after fixing the eyes.

Nose + ears (flesh color):

They are made with the same number of loops, so we make 3 pieces!

1. Row: 5 SC into magic ring

2. Row: İNC * (5x) {10 SC}

3. Row: (1 SC, İNC) (5 x) {15 SC}

4. Row: 15 SC {15 SC}

5. Row: (1 SC, DEC) * (5x) {10 SC}

We cut the yarn, and after the body and head are sewn, it’s worth sewing on the ears before

put on a hat. Sew the ears below the center line of the head so that they do not interfere with the exact

fitting cap.

After sewing on the nose, you can tint it as you wish (using a blush,

possibly using textile dye).

Beard:

To prepare a beard when the body and head are sewn, the ears are sewn and the hat is sewn to the head.

We start behind the left ear, bypassing it with a thread for eyelashes in front.

Take the yarn and start pulling the thread over the head behind the left ear (fasten), lower yourself to 6-7

rows down on the head and fasten the stitches. Walking under the nose, it runs along a horizontal line, then

symmetrically to the starting line.

To enrich the beard, we perform this stage several times.

BODY: (1 pc.) Start with a trouser-colored yarn.

1. Row: 6 SC İNTO MAGİC RİNG

2. Row: İNC * 6 {12 SC}

3. Row: (1 SC, İNC) * (6x) {18 SC}

4. Row: (2 SC, İNC) * (6x) {24 SC}

5. Row: (3 SC, İNC) * (6x) {30 SC}

6. Row: (4 SC, İNC) * (6x) {36 SC}

7. Row: (5 SC, İNC) * (6x) {42 SC}

8. Row: (6 SC, İNC) * (6 x) {48 SC}

9. Row: 48 SC {48 SC}

10. Row: (7 SC, İNC) * (6x) {54 SC}

11.-13. Row: 54 SC {54 SC}

14. Row: (8 SC, İNC) * (6 x) {60 SC}

15. Row: (9 SC, İNC) * (6 x) {66 SC}

Change the color to a dark brown or dark gray yarn (this will be the Santa Claus belt!)

16-18. Row: 66SC {66 SC}

Change the color to red (or any other color of your Santa’s jacket).

19. Row: (9SC, DEC) * (6x) {60 SC}

20-21. Row: 60SC {60 SC}

22. Row: (8 SC, DEC) * (6x) {54 SC}

23-24. Row: 54SC {54 SC}

25. Row: (7 SC, DEC) * (6x) {48 SC}

26. Row: 48SC {48 SC}

27. Row: (6 SC, DEC) * (6 x) {42 SC}

28. Row: 42 SC {42 SC}

29. Row: (5 SC, DEC) * (6x) {36 SC}

30. Row: 36 SC {36 SC}

31. Row: (4 SC, DEC) * (6x) {30 SC}

Switch to skin color!

Row 32: 30 {30 SC}

Cut the yarn so as to leave a longer thread to sew the body and head together!

RIGHT HAND (1 pc):

Let’s start with the white thread !!

Row 1: 7 SC into magic ring

Row 2: İNC * (7x) {14 SC}

Row 3: (1SC, İNC) * (7x) {21 SC}

4-5. Row: 27SC {21 SC}

Row 6: 5 DEC, (4CCH in 1 loop – POPCORN), 10 SC {16 SC}

Row 7: 16SC {16 SC}

Row 8: 1 DEC, 14 SC

Row 9: (3 SC, DEC) * (3x) {12 SC}

Row 10: (2 SC, DEC) * (3x) {9 SC} Change the color to “sweater color”!

11-27. Row: 9SC {9 SC} Crochet in total: 153 SC

When trimming the yarn, leave enough yarn to sew your hands on.

LEFT HANDS (1 pc):

Let’s start with the white thread!

Row 1: 7 SC into magic ring

Row 2: İNC * (7x) {14 SC}

Row 3: (1SC, İNC) * (7x) {21 SC}

4-5. Row: 21SC {21 SC}

Row 6: (POPCORN (finger design) in 1 loop), 5DEC, 10 SC {16 SC}

Row 7: 16SC {16 SC}

Row 8: 1 DEC, 14 SC {15 SC}

Row 9: (3 SC, DEC) * (3x) {12 SC}

Row 10: (2 SC, DEC) * (3x) {9 SC} Change the color to “jacket color”

11-27. Row: 9SC {9 SC} Crochet in total: 153 SC

Trimming yarn, leaving enough yarn to sew hands on.

Look on the Internet – How to Crochet Popcorn

Legs (2 PCS.):

Let’s start with the “shoe” yarn!

Row 1: 7 ch, 2 loop from hook, 4 SC, 4SC in 1 loop, then TURN to the other side

chains, 4 SC, 2 inc {16 SC}

Row 2: İNC, 5 SC, 4İNC ,, 5 SC, inc {22 SC}

Row 3: 2İNC, 6 SC, 2İNC, 4 SC, 2İNC, 8 SC {28 SC}

4-5. Row: 128SC {28 SC}

Row 6: DEC, 25 SC {27 SC}

Row 7: 8 SC, 6DEC, 7 SC {21 SC}

Row 8: 7 SC, 4DEC, 6 SC {17 SC}

Row 9: 6 SC, 3DEC, 5 SC {14 SC}

Row 10: 6 SC, 2DEC, 4 SC {12 SC}

Row 11: (2 SC, DEC) * (3x) {9 SC}

Change the color of your trousers!

12-16. Row: 9SC {9 SC} Spiral Knitting: 45 SC

Cap (1 pc):

Red yarn!

Row 1: 6 SC into magic ring

Row 2: 6SC {6 SC}

Row 3: 1 SC, inc (3x) {9 SC}

Row 4: 9SC {9 SC}

Row 5: (2 SC, İNC) * (3x) {12 SC}

Row 6: 12 SC {12 SC}

Row 7: (3 SC, İNC) * (3x) {15 SC}

Row 8: 15 SC {15 SC}

Row 9: 4 SC, inc (3x) {18 SC}

Row 10: 18 SC {18 SC}

Row 11: (5 SC, İNC) * (3x) {21 pp}

Row 12: 21 SC {21 SC}

Row 13: (6 SC, İNC) * (3x) {24 SC}

Row 14: 24 SC {24 SC}

Row 15: (7 SC, İNC) * (3x) {27 SC}

Row 16: 27SC {27 SC}

Row 17: (8 SC, İNC) * (3x) {30 SC}

Row 18: 30 SC {30 SC}

Row 19: (4 SC, İNC) * (6x) {36 SC}

Row 20: 36 SC {36 SC}

Row 21: (5 SC, İNC) * (6x) {42 SC}

Row 22: 42 SC {42 SC}

Row 23: (6 SC, İNC) * (6x) {48 SC}

Row 24: 48 SC {48 SC} Change the color to white yarn!

Row 25: (7 SC, İNC) * (6x) {54 SC}

26-28. Row: 54 SC {54 SC}

Trimming the yarn, leaving so much yarn that we could sew the cap to the head.

Sewing:

put the cap over your head well so that it fits.

The cap does not need to be filled, but if necessary, we can insert the wire and then

control where to tilt the cap.

Cap pompom (1 pc)

With white yarn!

Row 1: 5 SC into magic ring

Row 2: İNC * (5x) {10 SC}

Row 3: (1 SC, İNC) * (5x) {15r}

Row 4: 15 SC {15 SC}

Row 5: (1 SC, DEC) * (5x) {10 SC}

Row 6: DEC * 5 {5 SC}, tighten

Cut the yarn, leaving it long enough to sew the tassel to the cap.

Scarf (1 pc., Any color)

We crochet, turn and, starting with 3 loops from the hook. We knit dc we go to the end

chains. The ends of the scarf can be fringed.

SNOWMAN

Head (1 pc.) – use white yarn!

Row 1: 6 SC İNTO MAGİC RİNG

Row 2: 6inc {12 SC}

Row 3: 1SC, inc (6x) {18 SC}

Row 4: 2 SC, inc (6x) {24 SC}

Row 5: 3 SC, inc (6x) {30 SC}

Row 6: 4 SC, inc (6x) {36 SC)

Row 7: 5 SC, inc (6x) {42 SC}

Row 8: 6 SC, inc (6x) {48 SC}

9-16. Row: 48 SC {48 SC}

Row 17: 6 SC, dec (6x) {42 SC}

Row 18: 5 SC, dec (6x) {36 SC}

Row 19: 4 SC, dec (6x) {30 SC} Cut the yarn!

Embroider eyes after the figure is fully assembled. Over the nose. Place them on 1 row

close to each other.

If you do not like the embroidery, you can replace it with 6 mm protective eyes.

(Protective eyes are located between rows 11-12, with an interval of about 5 columns.) You

you can use a creative 10mm pompom for your nose, but you can replace it with

crocheted nose. ☺

Also embroider smiling lips before connecting your head and body.

Nose:

1. Row 1: 5 SC into magic ring

2. Row 2: 5inc {10 SC}

3. Row 3: (1 SC, İNC) * (5x) {15r}

4. Row 4: 15 SC {15 SC}

5. Row 5: (1 SC, DEC) * (5x) {10 SC}

Case: (1 pc.) With white thread

Row 1: 6 SC into magic ring

Row 2: 6inc {12 SC}

Row 3: (1 SC, İNC) * (6x) {18 SC}

Row 4: (2 SC, İNC) * (6x) {24 SC}

Row 5: (3 SC, İNC) * (6x) {30 SC}

Row 6: (4 SC, İNC) * (6x) {36 SC}

Row 7: (5 SC, İNC) * (6x) {42 SC}

Row 8: (6SC, İNC) * (6x) {48sc}

Row 9: 48 SC {48 SC}

Row 10: (7SC, İNC) * (6x) {54SC}

11-13 Row: 54 SC {54 SC}

Row 14: (8 SC, İNC) * (6x) {60 SC}

Row 15: 60 SC {60 SC} Change the color to the color of a snowman’s sweater!

Row 16: (8 SC, DEC) * (6x) {54 SC}

17 -18 Row: 54 SC {54 SC}

Row 19: (7SC, DEC) * (6x) {48sc}

20-21 Row: 48 SC {48 SC}

Row 22: (6 SC, DEC) * (6x) {42 sc}

23-24. Row: 42 SC {42 SC}

Row 25: (5 SC, DEC) * (6x) {36 SC}

Row 26: 36 SC {36 SC}

Row 27: (4 SC, DEC) * (6x) {30 SC}

Cut the yarn so as to leave a long thread to sew the body and head together!

Scarf (1 pc., Any color)

About 50 ch, turn and, starting with 3 loops from the hook, we knit through each chain link with

dc to the end of the row. The ends of the scarf can be fringed.

Cap (1 pc. Any color):

Row 1: 6 SC into magic ring

Row 2: 6SC {6 SC}

Row 3: (1 SC, İNC) * (3x) {9 SC}

4-6. Row: 9SC {9 SC}

Row 7: (2 SC, İNC) * (3x) {12 SC}

8-10. Row: 12 SC {12 SC}

Row 11: (3 SC, İNC) * (3x) {15 SC}

Row 12: 15 SC {15 SC}

Row 13: (4 SC, İNC) * (3 x) {18 sc}

Row 14: 18 SC {18 SC}

Row 15: (5 SC, İNC) * (3x) {21 SC}

Row 16: 21 SC {21 SC}

Row 17: (6 SC, İNC) * (3x) {24 SC}

Row 18: 24 SC {24 SC}

Row 19: (7SC, İNC) * (3x) {27SC}

Row 20: 27 SC {27 SC}

Row 21: (8 SC, İNC) * (3x) {30 SC}

Row 22: 30 SC {30 SC}

Row 23: (4 SC, İNC) * (6x) {36 SC}

Row 24: 36 SC {36 SC}

Row 25: (5 SC, İNC) * (6x) {42 SC}

Row 26: 42 SC {42 SC}

Row 27: (6 SC, İNC) * (6x) {48 SC}

28-30. Row: 48SC (48 SC), trim the yarn. Pull the cap over the snowman’s head and sew it on.

Cap brush (1 pc)

Make a brush of yarn according to the colors of the cap and sew it onto the cap.

We can also crochet a brush, in which case the snowman will have a cap similar to

Santa hat in the picture ☺

With white yarn!

Row 1: 5 SC into magic ring

Row 2: İNC * (5x) {10 SC}

Row 3: (1 SC, İNC) * (5x) {15sc}

Row 4: 15 SC {15 SC}

Row 5: (1 SC, DEC) * (5x) {10 SC}

Row 6: DEC * 5 {5 SC}, tighten

Cut the yarn, leaving it long enough to sew the tassel to the cap.

Similar Posts